Meals & Drinks in Central Region

Review of the budget power supply Deepcool DA600-M We continue to explore the range of inexpensive power supplies available in Russian retail. This time we got our hands on a fairly original Deepcool product - DA600-M. Its originality lies in the fact that with a retail price of less than 5,000 rubles, it is fully equipped with Japanese capacitors. The body is also used with the original milled stone finish. The grille above the fan, however, is stamped, but such a solution, unfortunately, is often found now. The packaging is a cardboard box of sufficient strength with matte printing. All the necessary parameters are indicated on the body of the power supply in full; for the power of the 12VDC bus, the value of 552 watts is declared. The ratio of the power on the 12VDC bus to the total power is 0.92, which can be considered a good indicator. 6 pin PCI-E 1.0 VGA Power Connector 8 pin PCI-E 2.0 VGA Power Connector Without exception, all wires are modular, that is, they can be removed, leaving only those that are necessary for a particular system. The length of the wires is sufficient fo Meals & Drinks in Central Region r comfortable use in full tower and larger cases with a top-mounted PSU. In cases up to 60 cm in height with a bottom-mounted power supply, the length of the wires should also be sufficient: to the processor power connector - 70 cm. Thus, with most modern cases, there should be no problems. It should be borne in mind that all SATA connectors are angular, except for one, and the use of such connectors is not very convenient in the case of drives placed on the back of the motherboard base or on any similar surface. The distribution of connectors along the power cords is not the best, since it will be problematic to fully provide power to several zones, especially if you need to connect devices at long distances from the power supply unit. However, in the case of a typical system with a pair of drives, complications are unlikely. On the positive side, it is worth noting the use of ribbon wires up to the connectors, which increases ease of assembly. The power supply is equipped with an active power factor corrector and has an extended supply voltage range from 100 to 240 volts. This ensures resistance to undervoltage in the power grid below the standard values. The main semiconductor elements are mounted on two medium-sized heat sinks. The first contains the elements of AC circuits, and the second contains rectifiers. The platform is clearly not the most advanced: group stabilization of 5VDC and 12VDC channels, as well as 3.3VDC on a separate stabilizer based on a magnetic amplifier, is implemented. Everything is quite typical for budget segment solutions. But all the capacitors in the power supply are of Japanese origin. High-voltage - Nichicon, low-voltage in the bulk - products under the Nippon Chemi-Con and Rubycon brands. https://jiji.com.gh/central-region/meals-and-drinks